How to Create Perfect Micro Ramp Plans Using 1/4 Inch Ply Wood

When it comes to building micro ramps, using the right materials is crucial for achieving the desired results. One of the best materials to use is 1/4 inch ply wood, which provides a smooth surface and easy construction process. In this article, we will guide you through the steps involved in creating perfect micro ramp plans using this versatile material.

Step 1: Cutting the Ply Wood

To begin with, cut the 1/4 inch ply wood into the desired shape and size for your micro ramp. For a simple design, you can use a rectangular piece of wood that is longer than it is tall. The taller the board, the more lax the slope will be.

Step 2: Creating the Ramp Angle

Next, draw a line on the plywood at an angle of around 10 degrees to create the ramp section. This will ensure that the ply wood touches the ground at the desired angle. Use a pencil and a straightedge to draw a smooth line.

Step 3: Securing the Ply Wood

To secure the ply wood in place, use nails or screws to attach it to the base of the ramp. Make sure to leave enough space between the nails or screws so that you can easily remove them later.

Step 4: Creating the Curve

Now it's time to create the curve on your micro ramp. To do this, use a string and tie one end to the top of the ply wood. Make sure the string is long enough to reach the bottom of the board and then some. Tie a pencil to the other end of the string so that it can hit the bottom of the board perfectly.

Step 5: Drawing the Curve

Keep the string tight and lightly draw back and forth on the ply wood until you get a smooth curve. Then, decide how high you want the ramp to be and draw downward, making sure the line is straight.

Step 6: Securing the Nails

To prevent the nails from getting in the way of the curve, bend them slightly so that they don't interfere with the string. Leave a small amount of nail sticking out so that you can remove it later.

Tips and Variations

If you plan on making your micro ramp 5 inches tall or more, you may want to consider using a different method instead of building a curved ramp. Simply pile up four 2x4s and nail them to a piece of ply wood for a sturdier structure.

You can also use a slim board attached to the ply wood to create a taller micro ramp with a more gradual slope. The key is to make sure that the base of the ramp is secure and sturdy before adding any additional materials or features.

In conclusion, creating perfect micro ramp plans using 1/4 inch ply wood is easier than you think. By following these simple steps and tips, you can build a smooth and curved ramp that will provide hours of fun for skateboarders and other thrill-seekers. Whether you're a seasoned builder or just starting out, this guide has everything you need to create the perfect micro ramp for your needs.

Micro ramp plans